EtherCAT Slave PROGRAMMABLE I/O
(In stock)
| Product Name | EtherCAT Slave PROGRAMMABLE I/O |
| Part Number | GN-9482 |
| Category | Network Communication |
| Brand | CREVIS |
| Country of Origin | South Korea |
| Material | High-grade Plastic |
GN-9481/9482/9483 (G-Series EtherCAT PROGRAMMABLE I/O) | |||
Programming | CoDeSys V3.5.11.3 | ||
| Program Memory | GN-9481 * | 512 KBytes | |
| GN-9482/9483 | 16 MBytes | ||
| Data Memory | GN-9481 | 96 KBytes | IO Input: %IW0 ~%IW2047 (2048 words) IO Output: %QW0 ~%QW2047 (2048 words) Memory: %MW0 ~ %MW8191 (8192 words) |
| GN-9482/9483 | 16 MBytes | ||
| Non-Volatile Memory | GN-9481 | 4 KBytes (Retain : 2 KBytes, Flag : 2 KBytes) | |
| GN-9482/9483 | 32 KBytes (Retain : 16KBytes, Flag : 16 KBytes) | ||
| Run-Time System | Multiple PLC Tasks | ||
| Program Languages | IEC 61131-3 (LD, IL, ST, FBD, SFC) | ||
| OPC-Server (DA) | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting | ||
| OPC-Server (UA) | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting (Input : 4KBytes / Output : 4KBytes) | ||
| Online Change | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting | ||
| Source Upload/Download | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting | ||
| File transmit | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting | ||
| Breakpoint | GN-9481 | Not supporting | |
| GN-9482/9483 | Supporting | ||
| Webvisualization | GN-9481/9482 | Not supporting | |
| GN-9483 | Supporting | ||
| RTC | GN-9481 | Retain Time : < 15 day | Accuracy : < 2min/month |
| GN-9482/9483 | Retain Time : < 15 day | ||
| Max. Task | 10 | ||
| Max. Cycle Task | 10 | ||
| Max. Status Task | 10 | ||
| Process Time | GN-9481 | 1usec (90 Instructions) | |
| GN-9482/9483 | 7usec (90 Instructions) | ||
| Interface Specification | |||
| Ethernet | |||
| Adapter Type | Master & Slave Node (Modbus TCP) | ||
| Baud rate | 10/100Mbps, Auto-negotiation, Full Duplex | ||
| Interface | RJ-45 socket * 1pcs | ||
| Ethernet Protocol** | Modbus/TCP, Modbus/UDP, SNTP HTTP (Webvisualization***, Web-Server), DHCP/BOOTP, OPC-server | ||
| Max. Nodes | Limited by Ethernet Specification | ||
| Max. Socket | 24 (UDP: 8, TCP: 16, TCP_LISTEN: 10) | ||
| Weight | 162g | ||
| Module Size | 54mm x 99mm x 70mm | ||
| EtherCAT | |||
| Adapter Type | Slave Node | ||
| Baud rate | 100Mbps | ||
| Interface | RJ-45 socket * 2pcs | ||
| Max. PDO | RxPDO | 64 ea | |
| TxPDO | 64 ea | ||
| Max. Size | Moduler | The maximum size is adjusted according to the IO size. | |
| Non-Moduler | 256 bytes. | ||
| EtherCAT Protocol | EtherCAT Slave | ||
| Max. Network Nodes | 65,535 | ||
| Common | |||
| Max. Expansion Module | 63 Slots | ||
| Max. Data Size(Input+Output) | Max 128Byte each slo | ||
| Serial Interface | RS232/RS485 2port (supporting Touch Pannel) | ||
| Serial Protocol | Modbus RTU / Baud Rate : 2400~115200 bps (Default: 115200 bps) | ||
| Indicator | 6 LEDs 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green/Red, PLC Run/Stop Status (RUN) 1 Green/Red, Expansion I/O Module Status (I/O) 1 Green, System Power Status 1 Green, Field Power Status | ||
General specification | |||
UL System Power | Supply voltage : 24Vdc nominal, Class 2 | ||
| System Power | Supply voltage : 24Vdc nominal Supply voltage range : 15~30Vdc Protection : Output current limit (Min. 1.5A) / Reverse polarity protection | ||
| Power Dissipation | 75mA typical @ 24Vdc | ||
| Current for I/O Module | 1.5A @ 5Vdc | ||
| Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation | ||
| UL Field Power | Supply voltage : 24Vdc nominal, Class 2 | ||
| Field Power | Supply voltage : 24Vdc typical (Max. 30Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. | ||
| Max. Current Field Power Contact | DC 10A Max | ||
| Weight | <167g | ||
| Wiring | I/O Cable Max. 2.0mm2(AWG 14) | ||
| Torque | 0.8 Nm(7 lb-in) | ||
| Module Size | 54mm x 99mm x 70mm | ||
Looks like there are no reviews yet.
