ITQ 0040
(In stock)
| Model | ITQ 0040 |
| Country Of Origin | Korea |
- Suitable for on-off small ball/plug vavles and damper automation
- By combination of spur gears, provide vvery high efficiency
- The motor is a specially designed induction motor that produces high
starting torques and thermally protected from overheating.
- Manual Operation by Spanner and dial position indication
- Very compact and light weight & High Duty Cycle
General Specifications | |
Enclosure | IP66, O-ring Sealed |
Power Supply | 110,220VAC/1Ph/50,60Hz, 24VDC |
Control Power | 110,220VAC/1Ph/50,60Hz |
Duty Cycle (ON-OFF) | S2: 30 min |
Motor | Induction Motor |
Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
Auxiliary Limit Switches | 2 ea for Open & Close (5A, 250VAC) |
Travel Angle | 90 º ± 5 % |
Position Indication | Continuous mechanical indicator with arrow |
Manual Override | Extruded shaft on bottom |
Terminal Block | Spring loaded push type |
Cable Entries | 2-PG13.5 with the plastic Cable Gland |
Space Heater | 5W (110/220VAC) for anti-condensing |
Ambient Temperature | -20 ~ + 70 ℃ |
Ambient Humidity | 90% |
Technical Specification | ||
Model | ITQ0040 | |
Rated Torque (Nm) | 40Nm (4kg.m) | |
Duty Cycle S2 | S2: 30 minutes | |
Operating Time (Second) 50Hz | 14 seconds | |
Operating Time (Second) 60Hz | 12 seconds | |
Female Shaft Size (mm) | 14X14mm Double Square | |
Motor Insulation Class | E | |
Rated Current (Amp.) 50 Hz / 60 Hz | 110 Volt | 0.16 A |
| 220 Volt | 0.18 A | |
| 24VDC | 0.8 A | |
No. of Handwheel | 7.5 | |
ISO 5211 Mounting Flange | ISO F03/05/07 Flange | |
Weight ( Kg ) | 3 kgs | |
Looks like there are no reviews yet.