Flow Nozzle
(In stock)
| Poduct Name | Flow Nozzle |
| Model number | HFN Series |
| Brand | HITROL |
| Category | Flow Instrument |
| Country of Origin | South Korea |
| Material | Stainless Steel. |
| Applications | Industrial flow measurement for high-velocity fluids. |
Overview
The measurement principle is based on the differential pressure that is generated between the upstream side and throat of nozzle, and the flow rate can be determined by the measured differential pressure value.
Flow Nozzle is costlier than orifice due to their construction but it is suitable to measure the flow rate of fluid flowing at high temperature and pressure. Under the same measurement condition, the flow nozzle has a higher mechanical strength, can permit the flow of more than 60 percent greater volume of a fluid, and can measure the flow rate of fluid which contains solid particles with less disturbance than an orifice which has the same bore.
Thus, it is suitable for high speed flowing fluids. HITROL can supply not only single flow nozzle but also flow nozzle having welded short pipe on both their upstream (4D) and downstream (2D) sides. Other types are available on request in full compliance with ISO-5167 (Including ISA 1932 Nozzles), Venturi-Nozzles, ASME MFC-3M, ASME PTC-6 standards.
Calibration and Discharge Coefficient Determination
All of HFN Series that is manufactured and supplied by Hitrol is calibrated with water at our liquid flow calibration system to determine the Discharge Coefficient (Cd) to verify the performance of the flow meter.
Discharge Coefficient
Long radius Nozzle manufactured in compliance with ISO-5167 and supplied with pipe wall taps have a discharge coefficient that is characterized by the equation below;
C = 0.9965-0.00653
The lap calibration presented below is a sample of wall taps assembly.
Looks like there are no reviews yet.